Top

Top>English>JSPS Core-to-Core Program>Reactive Metal Workshop

Organizers
Toru H. Okabe, Institute of Industrial Science, the University of Tokyo
Antoine Allanore, Massachusetts Institute of Technology
Donald R. Sadoway, Massachusetts Institute of Technology

Program Coordinators
Jungshin Kang, IIS, the University of Tokyo
Katsuhiro Nose, Massachusetts Institute of Technology

Program (Ver. 1.5, Printed, updated on Jun. 26, 2015)
(PDF file:473KB)
Document of Workshop Information
(PDF file:128KB)

Photo (Password is required.)(Updated April. 15, 2015)

The 10th Workshop on Reactive Metal Processing

March 20 (Fri.) - March 21 (Sat.), 2015, Cambridge, MIT

Time:
- 1st day: on March 20 (9:00 - 17:40 and Banquet in 18:30)
- 2nd day: on March 21 (9:00 - 12:20)
Refreshments will be served around 8:30 AM at the Grier room in both days.

Venue:
- Grier Room for Workshop (Building 34, Room 401)
Poster session is held at the Grier Room on March 20, 2015.
- MIT Museum for Banquet (http://web.mit.edu/museum)

Sponsor:
A part of the workshop is financially supported by Strategic Young Researcher Overseas Visits Program
for Accelerating Brain Circulation by JSPS (P.I.: Prof. T.H. Okabe), The Rare Metal Research Workshop (RC-40: directed by Prof. T.H. Okabe),
one of the Special Research Group organized by the Foundation for the Promotion of Industrial Science (FPIS),
SEIKEN Symposium No. 80 by the Foundation for the Promotion of Industrial Science (FPIS), and Grant-in-Aid for Scientific Research (S) by JSPS.

　

Day 1, Morning, March 20 (Friday), 2015 Grier Room
8:30 -	9:00	Coffee and Breakfast Service
9:00 -	9:10	Opening Remarks Prof. Donald R. Sadoway, Massachusetts Institute of Technology Prof. Toru H. Okabe, Institute of Industrial Science, the University of Tokyo
Session Chair: Prof. Toshiyuki Nohira
9:10 -	9:40	“Waste to energy conversion” Uday B. Pal¹ and Soobhankar Pati² ¹Division of Materials Science and Engineering, Boston University ²Indian Institutes of Technology (IIT) Bhubaneshwar
9:40 -	10:10	“Thermodynamic treatment of particulates sintering processes” Yiannis G. Kipouros¹, Paul Burke², George Jarjoura², and Georges J. Kipouros² ¹McMaster University ²University of Saskatchewan

10:10 -	10:20	Break
Session Chair: Prof. Tetsuya Uda
10:20 -	10:50	“Novel molten carbonate electrolysis for a low-carbon future” Dihua Wang¹ ¹Wuhan University
10:50 -	11:20	“Anode processes during electrowinning of aluminium” Geir Martin Haarberg¹, Henrik Åsheim¹, Rauan Meirbekova^1,2, Guðrún Sævarsdóttir², and Thor Anders Aarhaug³ ¹Department of Materials Science and Engineering, ¹Norwegian University of Science and Technology ²School of Science and Engineering, Reykjavik University ³SINTEF Materials and Chemistry
11:20 -	11:50	“Electrolytic nature of molten sulfides electrolyte” S. Sokhanvaran¹, S. Lee¹, G. Lambotte¹, and A. Allanore¹ ¹Department of Materials Science and Engineering, ¹Massachusetts Institute of Technology
11:50 -	13:00	Lunch

Day 1, Afternoon, March 20 (Friday), 2015 Grier Room
Session Chair: Prof. Georges J. Kipouros
13:00 -	13:30	“Electrodeposition of solar grade Si film on graphite in molten CaCl₂” Huayi Yin¹, Donald R. Sadoway¹, and Allen Bard² ¹Massachusetts Institute of Technology ²University of Texas at Austin
13:30 -	14:00	“Synthesis of aluminum nitride through chemical reduction and electrochemical reduction” Zhao Han¹, Kiwamu Katakiri², Daisuke Tsukamoto², Osamu Takeda², and Hongmin Zhu^1,2 ¹School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing ²Department of Metallurgy, Tohoku University
14:00 -	14:10	Break
Session Chair: Prof. Antoine Allanore
14:10 -	14:40	“Sodium secondary batteries with amide ionic liquids” Toshiyuki Nohira^1,2, Rika Hagiwara², Kazuhiko Matsumoto², Changsheng Ding², Chih-Yao Chen², Takayuki Yamamoto², Koma Numata³, Atsushi Fukunaga³, Shoichiro Sakai³, and Koji Nitta³ ¹Institute of Advanced Energy, Kyoto University ²Graduate School of Energy Science, Kyoto University ³Sumitomo Electric Industries, Ltd.
14:40 -	15:10	“Screening of effective ionic liquid for extraction of rare earth elements” Etsuro Shibata¹, Mariusz Grabda¹, Mrutyunjay Panigrahi¹, Dmytro Kozak¹, and Takashi Nakamura¹ ¹Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University
15:10 -	15:40	Photo & Break
Session Chair: Dr. Jungshin Kang
15:40 -	16:40	3-min short presentation by poster presenters
16:40 -	17:40	Poster Session
18:30 -		Banquet @ MIT Museum
Day 2, Morning, March 21 (Saturday), 2015 Grier Room

8:30 -	9:00	Coffee & Breakfast Service
9:00 -	9:10	Opening Remarks Prof. Antoine Allanore, Massachusetts Institute of Technology
Session Chair: Prof. Geir Martin Haarberg
9:10 -	9:40	“Alternative current voltammetry for electrometallurgy” Mary Elizabeth Wagner¹, Sangkwon Lee¹, Guillaume Lambotte¹, Andrew H. Caldwell¹, Samira Sokhanvaran¹, and Antoine Allanore¹ ¹Massachusetts Institute of Technology
9:40 -	10:10	“Quantum beam technology: catalytic materials prepared by ion beam irradiation for electrochemical device applications” Tetsuya Yamaki¹, Sho Kato², Tetsuya Kimata², Shunya Yamamoto¹, Teruyuki Hakoda¹, Tomohiro Kobayashi³, Akihiro Suzuki², and Takayuki Terai² ¹Quantum Beam Science Center, Japan Atomic Energy Agency (JAEA) ²Department of Nuclear Engineering and Management, The University of Tokyo ³Atomic Physics Laboratory, RIKEN
10:10 -	10:40	“High temperature electrolysis of REs and relevance for RE's recycling” Ana Maria Martinez¹ and Egil Skybakmoen¹ ¹SINTEF Materials and Chemistry
10:40 -	10:50	Break
Session Chair: Dr. Katsuhiro Nose
10:50 -	11:15	“Recovery of cobalt from aqueous solution by utilizing gel precipitation and solvent extraction” Sakae Shirayama¹ and Tetsuya Uda¹ ¹Department of Materials Science and Engineering, Kyoto University
11:15 -	11:40	“New smelting process of titanium using liquid bismuth” Akihiro Kishimoto¹, Kazuki Tsuchihashi¹, and Tetsuya Uda¹ ¹Department of Materials Science and Engineering, Kyoto University
11:40 -	12:05	“Fundamental study on new recycling technology for Ti metal scraps” Yu-ki Taninouchi¹, Yuki Hamanaka^1,2, and Toru H. Okabe¹ ¹Institute of Industrial Science, The University of Tokyo ²Department of Materials Engineering, The University of Tokyo
Day 2, Afternoon, March 21 (Saturday), 2015 Grier Room


12:05 -	12:10	Information for the Next RMW Prof. Antoine Allanore, Massachusetts Institute of Technology
12:10 -	12:20	Closing Remarks Prof. Donald R. Sadoway, Massachusetts Institute of Technology
12:20 -		Laboratory Tour (for applicants)

List of Poster Presentations

　

1.		“Electrodeposition mechanism of titanium in NaCl-KCl” Yuuki Yamada¹, Akihiro Kishimoto¹, and Tetsuya Uda¹ ¹Department of Materials Science and Engineering, Kyoto University
2.		“Electrolytic process for SiO₂ reduction using liquid Zn cathode in molten CaCl₂” Takeyuki Shimao¹, Xiao Yang^2,3, Kouji Yasuda^1,4, Toshiyuki Nohira^2,3, Rika Hagiwara¹, Koki Ichitsubo⁵, Kenta Masuda⁵, and Takayuki Homma^3,6 ¹Graduate School of Energy Science, Kyoto University ²Institute of Advanced Energy, Kyoto University ³JST-CREST, Japan ⁴Environmental, Safety, and Health Organization, Kyoto University ⁵R&D Center, Taiheiyo Cement Corporation ⁶Faculty of Science and Engineering, Waseda University
3.		“Electrodeposition of crystalline Si films utilizing water-soluble KF-KCl molten salts and SiCl₄ as a Si source” Kazuma Maeda¹, Kouji Yasuda^1,2, Toshiyuki Nohira^3,4, Rika Hagiwara¹, and Takayuki Homma^4,5 ¹Graduate School of Energy Science, Kyoto University ²Environment, Safety, and Health Organization, Kyoto University ³Institute of Advanced Energy, Kyoto University ⁴JST-CREST, Japan ⁵Faculty of Science and Engineering, Waseda University
4.		“In-situ spectroscopic studies of decomposition of ZrSiO₄ during alkali fusion process using various hydroxides” Zirui Wang¹, Qian Xu², Min Xu¹, Shuo Wang¹, and Jinglin You² ¹School of Materials Science and Metallurgy, Northeastern University ²School of Materials Science and Engineering, Shanghai University
5.		“The production of titanium/silicon carbide composites via the solid oxide membrane (SOM) process” Xingli Zou¹, Xionggang Lu¹, Qian Xu¹, and Zhongfu Zhou¹ ¹School of Materials Science and Engineering, Shanghai University
6.		“Thermodynamic properties of tellurium in molten steel” Shun Ueda¹ and Kazuki Morita¹ ¹Department of Materials Engineering, The University of Tokyo
7.		“Development of new recovery process for rhenium from nickel-base superalloy scraps” Ryohei Yagi^1,2and Toru H. Okabe² ¹Department of Materials Engineering, The University of Tokyo ²Institute of Industrial Science, The University of Tokyo
8.		“Development of new technique for concentrating and separating platinum group metals group metals” Tetsuo Watanabe¹, Yu-ki Taninouchi², and Toru H. Okabe² ¹Department of Applied Chemistry, Kogakuin University ²Institute of Industrial Science, The University of Tokyo
9.		“Recycling technologies for low-grade titanium scraps utilizing molten-salt-based reactions” Yuki Hamanaka^1,2, Yu-ki Taninouchi², and Toru H. Okabe² ¹Department of Materials Engineering, The University of Tokyo ²Institute of Industrial Science, The University of Tokyo
10.		“A laboratory study of partial anode effects during aluminium electrolysis” Henrik Åsheim¹, Ole Kjos², Espen Sandnes^1,3, Thor A. Aarhaug², Asbjørn Solheim², and Geir M. Haarberg¹ ¹Department of Materials Science and Engineering, NTNU ²SINTEF Materials and Chemistry ³Primary Metal Technology, Hydro Aluminium ASA
11.		“Influence of sulfur impurities on current efficiency in aluminium smelting processes” Rauan Meirbekova^1,2, Geir Martin Haarberg¹, Jomar Thonstad¹, Arne Petter Ratvik³, Ole Kjos³, Thor Anders Aahaug³, and Guðrún Sævarsdóttir^2,3 ¹Department of Materials Science and Engineering, NTNU ²Reykjavik University ³SINTEF Materials and Chemistry
12.		“Extraction of potassium by electrolysis from molten K-feldspar at high temperature for fertilizer applications” Carole Gadois¹ and Antoine Allanore¹ ¹Department of Materials Science and Engineering, MIT
13.		“Hydrosyenite: a new potassium fertilizer” Davide Ciceri¹, Carole Gadois¹, Sonja Postak¹, and Antoine Allanore¹ ¹Department of Materials Science and Engineering, MIT
14.		“Fundamental study on vaporization behavior of molten sulfides for molten sulfide electrolysis” Katsuhiro Nose^1,2and Antoine Allanore¹ ¹Department of Materials Science and Engineering, MIT ²Institute of Industrial Science, The University of Tokyo
15.		“Ultra high temperature rare earth metal extraction by electrolysis” Bradley R. Nakanishi¹, Guillaume Lambotte¹, and Antoine Allanore¹ ¹Department of Materials Science and Engineering, MIT
16.		“The effect of Fe(II) ions on copper electrolysis” Mary Elizabeth Wagner¹, Sangkwon Lee¹, and Antoine Allanore¹ ¹Department of Materials Science and Engineering, MIT
17.		“In situ measurements of current density for a galvanically coupled electrode” Brian Chmielowiec¹ and Antoine Allanore¹ ¹Department of Materials Science and Engineering, MIT
18.		“Porous carbon anodes for supply of methane during electrowinning of aluminium” Babak Khalaghi¹, Tommy Mokkelbost², Ole Kjos², Henrik Gudbrandsen², and Geir Martin Haarberg¹ ¹Department of Materials Science and Engineering, NTNU ²SINTEF Materials and Chemistry
19.		“Introduction of the recycling of spent automotive and petrochemical catalysts in Tanaka Precious Metal” Akihiko Okuda¹ and Tomoko Yanagisawa¹ ¹Tanaka Kikinzoku Kogyo K.K., Tanaka Holdings Co., Ltd.